PRODUCTS & SOLUTIONS

    FIBERMET G

    Pre-insulated metal panels with insulation in WOOL GLASS for walls.

    Dimensions

    width mm 1000

    length upon request from continuous production process.

    Standard insulating thickness

    mm 50 - 60 - 80 - 100 - 120 - 150 - 200 panels of non standard thicknesses can be supplied upon request previous agreement on minimum quantities.

    Supports

    galvanized steel, galvanized prepainted or plastified steel; stainless steel; natural or prepainted aluminium; copper (CORAM).

    Isolation

    glass wool fibers average nominal density 55 Kg/m3 ± 10% - λ = 0,039 W/mK

    Reaction to fire

    A2,s1-d0

    Sustainability

    recycled glass: 80% - end of life recyclability: 100%

    Protective treatments for external support available

    On request for external polyester coating, atoxic prepainted for food contact, silicone polyester, PVDF, thermoplastic Class A application of PVC plastic films or other films

     

    ADVANTAGES / STRENGTHS

      • Insulation with a high level of purity: minimum presence of impurities within the fibers;

      • Insulating material with improved acoustic performance thanks to new generation binders and more homogeneous and long fibers;

      • Improved thermal insulation compared to mineral wool (glass wool λ = 0,039 W/mK);
      • Over 80% of the raw material is recycled from the glass;
      • Glass wool is made of a new generation thermosetting resin with a minimum content of harmful chemicals;
      • High durability over time;
      • Excellent mechanical resistance;
      • Dimensional stability with variations in temperature and humidity;
      • Entirely produced in Italy;

     

    LOADS TABLE

    PITCH BETWEEN SUPP.(m)
    PANEL TICKNESS(mm)
    SHEET TICKNESS(mm)
    MATERIAL
    MAXIMUM UNIFORMLY DISTRIBUTED LOAD (daN/m2) - DEFLECTION *
    Panel
    Thickness
    (mm)
    MaterialSheet
    thickness
    (mm)
    Pitch 'L' in meters between the supports
    1,50 2,00 2,50 3,00 3,50 4,00 4,50 5,00 5,50 6,00
    50ACCIAIO0,5 + 0,5 216 121 78 54 40 30 24 19 16 13
    60ACCIAIO0,5 + 0,5 207 117 75 52 38 29 23 19 15 13
    80ACCIAIO0,5 + 0,5 277 156 100 69 51 39 31 25 21 17
    100ACCIAIO0,5 + 0,5 371 209 134 93 68 52 41 33 28 23
    120ACCIAIO0,5 + 0,5 446 251 160 111 82 63 50 40 33 28
    150ACCIAIO0,5 + 0,5 462 314 201 139 102 78 62 50 41 35
    200ACCIAIO0,5 + 0,5 480 360 268 186 137 105 83 67 55 47
    MAXIMUM UNIFORMLY DISTRIBUTED LOAD (daN/m2) - DEFLECTION *
    Panel
    Thickness
    (mm)
    MaterialSheet
    thickness
    (mm)
    Pitch 'L' in meters between the supports
    1,50 2,00 2,50 3,00 3,50 4,00 4,50 5,00 5,50 6,00
    50ACCIAIO0,5 + 0,512190673925181310
    60ACCIAIO0,5 + 0,51219072513323171310
    80ACCIAIO0,5 + 0,519514411483523626201512
    100ACCIAIO0,5 + 0,521615912695583827201512
    120ACCIAIO0,5 + 0,5220162129107694632241815
    150ACCIAIO0,5 + 0,5230169134111956545332520
    200ACCIAIO0,5 + 0,52481821431191018970513830

    Insights on the test report

    (Note) The report test given, is provided for information purposes only. Values and formulas should not be used to determine or calculate the flow rate of the panel. It is the responsibility and care of the customer and/or designer to draft appropriate calculations with specific reference for individual uses. The thicknesses and quality of steel defined in the report test above, does not represent a standard of product as the combination of thicknesses and materials is determined by the customer according to their technical requirements, therefore the customer and/or the designer are required to specify thickness, quality and type of materials that the producer will use in the construction of the panels.

     

    * deflection = 1/100 L

    © 1999-2019, ISOLPACK SpA. All rights reserved.