PRODUCTS & SOLUTIONS

    ISOGREK H28

    ISOGREK h 28 is a single-sheet metal panel obtained by coupling a resistant metal profile h 28 mm to a layer of high-density polyurethane foamed continuously. Being modular, light, insulated and resistant, it adapts itself to any type of use for the plugging of the external building envelope.

    Materials and quality:
    ISOGREK h 28 is realized through a continuous production process, through the use of highly innovative technologies that allow to have a density of polyurethane superior to a simple single sheet panel. This feature, combined with the 9 waves trapezoidal geometry of the section, makes the product highly resistant to concentrated loads.

    Reduced condensation effect:
    ISOGREK h 28 is a perfect vapor barrier. The humid air condenses on cold surfaces, therefore the polyurethane makes the support thermally insulated and avoids the formation of water on the inside of the panel.

    Thermal and acoustic insulation:
    ISOGREK h 28 has all the features and advantages of a simple corrugated metal sheet: (lightness, modularity, versatility and low costs) but also offers discrete thermal insulation and considerable noise reduction due to rain.

    Dimensions

    width mm 1000

    length upon request from continuous production process.

    Thicknesses (S)

    mm 10

    External support

    galvanized steel, galvanized prepainted or plastified steel; stainless steel; natural or prepainted aluminium.

    Insulation through continuous foaming process

    polyurethane resins (PUR) - density 60 ±2 Kg/m³

    Protective treatments for external support available

    On request for external polyester coating, atoxic prepainted for food contact, silicone polyester, PVDF, thermoplastic Class A application of PVC plastic films or other films.

    LOADS TABLE

    PITCH BETWEEN SUPP.(m)
    PANEL TICKNESS(mm)
    SHEET TICKNESS(mm)
    MATERIAL
    MAXIMUM UNIFORMLY DISTRIBUTED LOAD (daN/m2) - DEFLECTION *
    Panel
    Thickness
    (mm)
    MaterialSheet
    thickness
    (mm)
    Pitch 'L' in meters between the supports
    0,80 1,00 1,20 1,25 1,40 1,50 1,60 1,75 1,80 2,00 2,25 2,50 2,75 3,00
    10ALLUMINIO0,5
    10ALLUMINIO0,6 579 405 235 148 99 69 52
    10ALLUMINIO0,7 753 473 274 172 115 81 63
    10ALLUMINIO0,8 943 542 313 197 132 93 75
    10ALLUMINIO1,0 1245 677 392 247 165 115 89
    10ACCIAIO0,5 1011 517 300 189 126 89 64 49 37
    10ACCIAIO0,6 1214 621 359 226 151 106 77 58 45
    10ACCIAIO0,7 1418 725 419 264 177 124 91 68 52
    10ACCIAIO0,8 1620 829 480 301 202 142 103 77 59
    10ACCIAIO1,0 2026 1037 600 378 252 177 129 97 74

    (Note) The report test given above, is provided for information purposes only. Values and formulas should not be used to determine or calculate the flow rate of the panel. It is the responsibility and care of the customer and/or designer to draft appropriate calculations with specific reference for individual uses. The thicknesses and quality of steel defined in the report test above, does not represent a standard of product as the combination of thicknesses and materials is determined by the customer according to their technical requirements, therefore the customer and/or the designer are required to specify thickness, quality and type of materials that the producer will use in the construction of the panels.

     

    * deflection = 1/200 L

    © 1999-2019, ISOLPACK SpA. All rights reserved.