PRODUCTS & SOLUTIONS

    R/W 1000

    Dimensions

    width mm 1.000

    length upon request from continuous production process.

    Thickness

    from mm 0,6 to mm 1,5 - also non-standard on request.

    Materials

    Galvanized steel, coated or laminated; stainless steel, copper:
    - steel in compliance with the UNI EN 10147 Fe E 250 G type, available in hot galvanized with "sendzimir" process, pre-painted or plasticized galvanized.
    - Aluminum alloy 3103 H16 conforming to the UNI 9003/3 Standard or according to UNI 10372, available natural or pre-painted.
    - AISI 304 stainless steel, 2B finish, compliant with UNI 10372 Standards.
    - CORTEN.
    - Copper conformity with standards UNI EN 1172 - UNI 10372.

    Protective treatments for external support available

    polyester outdoor coating, silicone polyester, PVDF, thermoplastic class A

    LOADS TABLE

    PITCH BETWEEN SUPP.(mm)
    SHEET TICKNESS(mm)
    MATERIAL
    MAXIMUM UNIFORMLY DISTRIBUTED LOAD (daN/m2) - DEFLECTION ≤ 1/200 L
    Panel
    Thickness
    (mm)
    MaterialSheet
    thickness
    (mm)
    Pitch 'L' in meters between the supports
    1,00 1,25 1,50 1,75 2,00 2,25 2,50 2,75 3,00 3,25 3,50 3,75
    0ACCIAIO0,6 772 494 343 243 163 114 83 62
    0ACCIAIO0,7 939 601 417 286 192 134 98 73 56
    0ACCIAIO0,8 1080 691 480 329 220 155 113 84 65 51
    0ACCIAIO1,0 1361 871 605 415 278 195 142 106 82 64 51
    MAXIMUM UNIFORMLY DISTRIBUTED LOAD (daN/m2) - DEFLECTION ≤ 1/200 L
    Panel
    Thickness
    (mm)
    MaterialSheet
    thickness
    (mm)
    Pitch 'L' in meters between the supports
    1,00 1,25 1,50 1,75 2,00 2,25 2,50 2,75 3,00 3,25 3,50 3,75
    0ACCIAIO0,69416024183072351851501209373
    0ACCIAIO0,711187164973652792201791421098668
    0ACCIAIO0,81297830576423324256207163125987964
    0ACCIAIO1,0165910627375414143272652051581249981

    Insights on the test report

    (Note) The report test given, is provided for information purposes only. Values and formulas should not be used to determine or calculate the flow rate of the panel. It is the responsibility and care of the customer and/or designer to draft appropriate calculations with specific reference for individual uses. The thicknesses and quality of steel defined in the report test above, does not represent a standard of product as the combination of thicknesses and materials is determined by the customer according to their technical requirements, therefore the customer and/or the designer are required to specify thickness, quality and type of materials that the producer will use in the construction of the panels.

    © 1999-2019, ISOLPACK SpA. All rights reserved.