PRODUCTS & SOLUTIONS

    ONDA

    Dimensions

    width mm 1000

    length upon request from continuous production process.

    Spessore standard di poliuretano fuori greca (S)

    mm 70 - 80 - 100 panels of non standard thicknesses can be supplied upon request previous agreement on minimum quantities.

    Supports

    galvanized steel, galvanized prepainted or plastified steel; stainless steel; natural or prepainted aluminium; copper (CORAM).

    Insulation through continuous foaming process

    Polyurethane resins (PUR) and (not standard) polyisocianurate foams (PIR), density 39 ±2 Kg/m³ Declared value of thermal transmittance for a panel after 25 years of its installation, (Appendix C - EN 13165) Initial value of thermal conductivity: λ = 0.020 W/(mK)

    Protective treatments for external support available

    On request for external polyester coating, atoxic prepainted for food contact, silicone polyester, PVDF, thermoplastic Class A application of PVC plastic films or other films

    Insights PIR foam

    On request is available in PIR foam version (polyisocyanurate), a particular polymeric structure that guarantees excellent characteristics of fire behavior. The entire range of ISOLPACK panels has been certified in Class B-s2, d0 at CSTB (France) and at KIT (Germany) in compliance with UNI EN 13823 (SBI) * where, "B" expresses the quantity of heat produced during the first 600 seconds of the test <7.5 MJ (best value obtainable for foamed products); "S2" represents a very low development of the fumes and "d0" indicates the absolute absence of drops and/or inflamed particles. In last years, the SBI test has become a standard requirement in Europe for fire behavior of building materials. The new European standard for sandwich panels - UNI EN 14509 - uses the SBI system for fire classification purposes. ISOLPACK is the only one in Italy to design light, highly insulating applications with unequaled fire reaction requirements. In many cases it can replace the rock wool panel considering its fire reaction characteristics combined with the very high thermal insulation power.

    LOADS TABLE

    PITCH BETWEEN SUPP.(mm)
    PANEL TICKNESS(mm)
    SHEET TICKNESS(mm)
    MATERIAL
    MAXIMUM UNIFORMLY DISTRIBUTED LOAD (daN/m2) - DEFLECTION ≤ 1/200 L
    Panel
    Thickness
    (mm)
    MaterialSheet
    thickness
    (mm)
    Pitch 'L' in meters between the supports
    1,50 2,00 2,50 3,00 3,50 4,00 4,50 5,00 5,50 6,00
    70ALLUMINIO0,5 + 0,5
    70ACCIAIO0,5 + 0,5 380 246 204 180 153 101 76 48 32 23
    80ALLUMINIO0,5 + 0,5
    80ACCIAIO0,5 + 0,5 410 348 275 224 160 130 100 65 45 33
    100ALLUMINIO0,5 + 0,5
    100ACCIAIO0,5 + 0,5 500 402 305 250 204 150 111 86 65 45
    MAXIMUM UNIFORMLY DISTRIBUTED LOAD (daN/m2) - DEFLECTION ≤ 1/200 L
    Panel
    Thickness
    (mm)
    MaterialSheet
    thickness
    (mm)
    Pitch 'L' in meters between the supports
    1,50 2,00 2,50 3,00 3,50 4,00 4,50 5,00 5,50 6,00
    70ALLUMINIO0,5 + 0,5
    70ACCIAIO0,5 + 0,539525521219416310885564835
    80ALLUMINIO0,5 + 0,5
    80ACCIAIO0,5 + 0,5422360284231178141120806345
    100ALLUMINIO0,5 + 0,5
    100ACCIAIO0,5 + 0,5533424330278225184130948653

    (Note) The report test given above, is provided for information purposes only. Values and formulas should not be used to determine or calculate the flow rate of the panel. It is the responsibility and care of the customer and/or designer to draft appropriate calculations with specific reference for individual uses. The thicknesses and quality of steel defined in the report test above, does not represent a standard of product as the combination of thicknesses and materials is determined by the customer according to their technical requirements, therefore the customer and/or the designer are required to specify thickness, quality and type of materials that the producer will use in the construction of the panels.

    © 1999-2019, ISOLPACK SpA. All rights reserved.